Update on (Android) 2021.4.8, (IOS) 2021.4.23
eWeLink APP V4.11
Firmware version 3.5.0
1. Automatic control with timer
Previously, automation allowed only one threshold to be set, which took effect throughout all day after it was enabled. Now, you can set six different time schedules in the automation control, each of which can set different temperature or humidity thresholds to achieve the effect of executing different automation controls at different time periods.
Please keep a good network connection to the server when using the automatic control, otherwise, it may lead to an untimely update of the threshold value.
2. Support LAN control
When your WiFi is disconnected from the server, the device is also offline and uncontrollable. However, if the device supports LAN control, the phone, the device connected to the same WiFi, travel a LAN, some features can still be used normally in App.
- Temperature and humidity monitoring
- switch on/off (Only in manual mode)
- Power-on state
- Network indicator
- Inching settings
3. Online switching WiFi
When you change your WiFi or transfer the device to other routers for releasing the load, it may feel very inconvenient to press the pairing button on the device. Now switching WiFi online can be a good solution to this problem, you just need to enter the new WiFi and password on the eWeLink app, and then you can quickly change the WiFi your device is connected to.
Setup steps: Device Settings-WiFi Settings