Introduction
This blog provides a quick overview of the key Home Assistant features supported by SONOFF OpenEdge-enabled devices. Feature availability may vary by device model, and the list will be updated as more SONOFF devices gain OpenEdge support.
🔄 Continuously updated — stay tuned for the latest developments.
DIY Smart Switch Series
MINI-1GSP
|
Feature |
Category |
via Matter |
via MQTT |
|
Relay Control |
Turn the relay/channel on or off |
✓ |
✓ |
|
External Switch |
Use the external switch as a trigger source |
— |
✓ |
|
*OTA Firmware Update |
Update device firmware |
— |
✓ |
|
Power-on State |
Configure power-on behavior |
— |
✓ |
|
Existing power-on settings remain— effective |
— |
✓ |
|
|
Energy Monitoring |
Real-time current, voltage, power, and frequency |
✓ |
✓ |
|
Total imported / exported energy |
✓ |
✓ |
|
|
Protection |
Over-temperature / over-current / over-power / over-voltage / under-voltage status |
— |
✓ |
|
Switch Mode |
— |
— |
✓ |
|
Detach Relay |
— |
— |
✓ |
MINI-1GP
|
Feature |
Category |
via Matter |
via MQTT |
|
*OTA Firmware Update |
Update device firmware |
— |
✓ |
|
Energy Monitoring |
Real-time current, voltage, power, and frequency |
✓ |
✓ |
|
Total imported / exported energy |
✓ |
✓ |
Leave a comment
All comments are moderated before being published.
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.